In this guide, we will show you the steps to flash the latest Project Elixir ROM based on Android 14 onto your Poco F5/Redmi Note 12 Turbo. The devices from Poco have always been among the most active players in custom development, and the fifth iteration in this lineup is no exception either. It has rightly carried forward the legacy of its predecessor and has been receiving great support from the developers. As a result of which, it has been blessed with tons of AOSP ROMs.
But this then leaves the users with the problem of plenty [not that they are complaining though!]. So which one should they ultimately opt for? Well, if you are looking for a clean and stock OS with tons of Pixel goodies which is subsequently packed in a fast, snappy, and performance-enhanced system, then your best bet is to flash the Project Elixir ROM onto your Poco F5/Redmi Note 12 Turbo. So without further ado, let’s get started with the flashing.
Table of Contents
How to Install Android 14 on Poco F5 [Video]
The below instructions will wipe off all the data, so please take a backup beforehand. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
STEP 1: Install Android SDK
First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide.
STEP 2: Enable USB Debugging and OEM Unlocking
Next up, you will also have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode. On the other hand, OEM Unlocking is required to carry out the bootloader unlocking.
So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.
STEP 3: Unlock Bootloader on Poco F5
Next up, you will also have to unlock the device’s bootloader. Do keep in mind that doing so will wipe off all the data from your device and could nullify its warranty as well. So if that’s all well and good, then please refer to our detailed guide on How to Unlock Bootloader on any Xiaomi Device.
STEP 4: Download Firmware
Next up, you’ll have to download the latest firmware corresponding to your region. You may get them from below:
Firmware for Poco F5/Redmi Note 12 Turbo
STEP 5: Download Project Elixir for Poco F5
- You may now grab hold of the Project Elixir ROM for your device from below.
Project Elixir ROM: DOWNLOAD LINK
- Rename the ROM file to rom.zip and transfer it to the platform-tools folder.
STEP 6: Boot to Fastboot Mode
- Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- After that, type in the following command in the CMD window to boot your device to Fastboot Mode
adb reboot bootloader
- To verify the Fastboot connection, type in the below command and you should get back the device ID.
fastboot devices
- If you don’t get any serial ID, then please install Fastboot Drivers.
STEP 7: Install TWRP Recovery
Next up, you’ll have to install the TWRP Recovery on your device. For that, check out our guide on How to Install TWRP Recovery on Poco F5/Pro/Redmi Note 12 Turbo/K60. Make sure to download the Android 14 recovery provided there.
STEP 8: Install Project Elixir on Poco F5
- From TWRP, go to Wipe and checkmark Dalvik Cache, Cache, and Data.
- Then perform a right swipe to wipe these partitions.
- Once done, go to Wipe > Format Data > Type in YES in the space provided and hit Enter.
- Then transfer the firmware.zip and rom.zip onto your device.
- Now go to Install, select the firmware.zip, and perform a right swipe to flash it.
- Once done, go to Install, select the rom.zip file, and perform a right swipe to flash it.
- Once flashed, again do a format data via the TWRP Recovery.
- Finally, go to Reboot and select System. Your device will boot to the newly flashed OS.
These were the steps to install the latest Project Elixir ROM based on Android 14 onto your Poco F5/Redmi Note 12 Turbo. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.
