eliterom poco f4

Install EliteROM, Root, Pass SafetyNet on Poco F4 [Video]

In this guide, we will show you the steps to install the EliteROM on your Poco F4. Poco devices have always been known to be among the most active players in custom development. And the same is the case with the fourth iteration as well. There are a plethora of mods, tweaks, and ROMs available for this device that you could welcome abode onto your device right away.

eliterom poco f4
EliteROM on Poco F4

If we talk about custom ROMs, then most of them are AOSP based and provide a clean stock usage experience with a few goodies. However, if you don’t want to leave the MIUI ecosystem but at the same time, wish to get hold of a slew of customizations, then your best bet is to install the EliteROM on your Poco F4. And in this guide, we will show you how to do just that. Follow along.

How to Install EliteROM on Poco F4 [Video]

The below instructions are listed under separate sections for ease of understanding. Make sure to follow in the exact same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

STEP 1: Install Android SDK

install adb platform tools windows

First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide to install EliteROM on Poco F4.

STEP 2: Enable USB Debugging and OEM Unlocking

Next up, you will also have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode. On the other hand, OEM Unlocking is required to carry out the bootloader unlocking.

eliterom poco f4

So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.

STEP 3: Unlock Bootloader on Poco F4

Next up, you will also have to unlock the device’s bootloader. Do keep in mind that doing so will wipe off all the data from your device and could nullify its warranty as well. So if that’s all well and good, then please refer to our detailed guide on How to Unlock Bootloader on any Xiaomi Device.

eliterom poco f4

STEP 4: Download EliteROM for Poco F4

  1. You may now grab hold of the ROM for your device from below:
    EliteROM for Poco F4: DOWNLOAD LINK
  2. Transfer the downloaded ROM file to your device.

STEP 5: Install TWRP/OrangeFox Recovery on Poco F4

You will now have to install a custom recovery onto your Poco F4 to flash EliteROM. In this regard, you could either Install TWRP Recovery on Poco F4 [Video] or Install Orange Fox Recovery on Poco F4 [Video]. We will be using the TWRP Recovery.

eliterom poco f4

STEP 6: Boot to TWRP Recovery

  1. Now connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
  2. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
    sparkos poco f4
  3. Type in the following command in the CMD window to boot your device to TWRP Recovery
    adb reboot recovery

STEP 7: Install EliteROM on Poco F4

  1. From TWRP Recovery, go to Install, select the ROM ZIP and perform a right swipe to flash it.
    eliterom poco f4On some devices, you might get an error after flashing is complete, that’s completely normal and nothing to worry about.
  2. Now go to Wipe > Format Data > type YES in the space provided and then hit the checkmark.eliterom poco f4
  3. Once done, go to Reboot and select Recovery. Your device will now reboot to EliteROM’s own built-in TWRP Recovery.eliterom poco f4
  4. Moreover, it will be in Chinese, so make sure to change the language to English [if required], as shown below.eliterom poco f4
  5. Once done, go to Reboot and select System. Your device will now reboot to the newly installed OS.eliterom poco f4

That’s it. These were the steps to install EliteROM on your Poco F4. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.

Root EliteROM and Pass SafetyNet

Check out this written guide or the below-attached video:

About Chief Editor

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.