How to Install EliteROM on Mi 11/11 i/11T Pro/ Mi 11 Ultra

Sadique Hassan•Updated Apr 25, 2023

In this guide, we will show you the steps to install EliteROM on Mi 11/11 i/11T Pro/ Mi 11 Ultra. The eleventh iteration of devices from the Chinese OEM beholds an impressive spec sheet, strong build quality, and a more than a decent camera as well. However, according to some, it is the software front where the device tends to fall short a little bit. While there does exist a plethora of AOSP ROMs, but installing them means you will have to completely ditch the MIUI ecosystem.

So is there a way to remain in the stock Xiaomi ecosystem but at the same time, add a few intriguing goodies to the device? Well, there is one! All that you need to do is install the latest EliteROM on Mi 11/11 i/11T Pro/ Mi 11 Ultra. And in this guide, we will help you in welcoming abode this ROM onto your device. So without further ado, let’s get started.

Table of Contents

How to Install EliteROM on Mi 11/11 I/11T Pro/ Mi 11 Ultra [Video]

The below instructions are listed under separate sections for ease of understanding. Make sure to follow in the exact same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

STEP 1: Install Android SDK

First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide to install EliteROM on Poco F4.

STEP 2: Enable USB Debugging and OEM Unlocking

Next up, you will also have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode. On the other hand, OEM Unlocking is required to carry out the bootloader unlocking.

So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.

STEP 3: Unlock Bootloader on Mi 11/11 i/11T Pro/ Mi 11 Ultra

Next up, you will also have to unlock the device’s bootloader. Do keep in mind that doing so will wipe off all the data from your device and could nullify its warranty as well. So if that’s all well and good, then please refer to our detailed guide on How to Unlock Bootloader on any Xiaomi Device.

STEP 4: Download EliteROM for Mi 11/11 i/11T Pro/Mi11 Ultra

Grab hold of the ROM for your device from below:

EliteROM for Mi 11/11 i/11T Pro/ Mi11 Ultra: DOWNLOAD LINK

Then transfer the downloaded ROM file to your device.

STEP 5: Install TWRP/OrangeFox Recovery on Mi 11/11 i/11T Pro/ Mi 11 Ultra

You will now have to install a custom recovery onto your Mi 11/11 i/11T Pro/ Mi 11 Ultra to flash EliteROM. In this regard, you could either Install TWRP Recovery or Install Orangefox Recovery.

STEP 6: Boot to TWRP Recovery

Now connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Type in the following command in the CMD window to boot your device to TWRP Recovery
```
adb reboot recovery
```

STEP 7: Install EliteROM on Mi 11/11 i/11T Pro/ Mi 11 Ultra

From TWRP Recovery, go to Install, select the ROM ZIP and perform a right swipe to flash it.
On some devices, you might get an error after flashing is complete, that’s completely normal and nothing to worry about.
Now go to Wipe > Format Data > type YES in the space provided and then hit the checkmark.
Once done, go to Reboot and select Recovery. Your device will now reboot to EliteROM’s own built-in TWRP Recovery.
Moreover, it will be in Chinese, so make sure to change the language to English [if required], as shown below.
Once done, go to Reboot and select System. Your device will now reboot to the newly installed OS.

That’s it. These were the steps to install EliteROM on your Mi 11/11 i/11T Pro/ Mi 11 Ultra. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.