In this guide, we will show you various methods to fix the Installer Stopped Prematurely Error on your Windows PC. As of late, numerous users have voiced their concern that they are getting bugged with the aforementioned error message when trying to install an application on their PC. The issue is mostly associated with MSI and EXE setup files and seems to be affecting all the iterations of the OS. As far as the plausible reason for this issue is concerned, it could be quite a few ones.
These include issues with Windows Installer Service and .NET Framework, third-party apps conflicting with the system services, temporary data in the Temp & Prefetch folder, de-registration of the VBScript.dll, or issues with the administrator account. So in this guide, we will be addressing all these concerns which in turn should help you fix the Installer Stopped Prematurely Error in Windows. Follow along.
Table of Contents
Fix Installer Stopped Prematurely Error on Windows
It is recommended that you try out each of the below-mentioned workarounds and then see which one spells out success for you. So with that in mind, let’s get started.
FIX 1: Run as Administrator
First and foremost, you should run the affected program with administrative privileges so that it gets the required elevated permissions.
- To begin with, right-click on the installer file and select Properties.
- Then go to the Compatibility tab and checkmark Run this program as administrator.
- Now, click OK to save the changes. Then launch the setup and click YES in the UAC prompt.
- Check if it fixes the Installer Stopped Prematurely Error on your Windows PC or not.
FIX 2: Restart Windows Installer Service
If the Windows Installer Service isn’t functioning along the expected lines, then its repercussions will be faced by various apps and software that are on your PC. Therefore, you should consider restarting the Windows Installer Service using the instructions given below and then check out the results
- To begin with, launch the Services app from the Start menu.
- Then select the Windows Installer Service, right-click on it, and select Restart.
- Wait for a few seconds and then check if it fixes the Installer Stopped Prematurely Error.
FIX 3: Re-Enable .NET Framework
If .NET Framework is having any issues, then all the apps and processes that are dependent on it wouldn’t be able to function properly. Therefore, you should consider toggling off and then re-enabling this framework. This in turn will restart its underlying processes and hence resolve the issue that we are currently facing.
- Open “Turn Windows features on or off” from the Start menu.
- Then uncheck .NET Framework 3.5 and hit OK.
- Again bring up the Windows Feature dialog box.
- This time re-check .NET Framework 3.5 and hit OK.
- Check if it fixes the Installer Stopped Prematurely Error.
FIX 4: Boot to Safe Mode
In some instances, a third-party app might conflict with the normal data exchange process. The best way to verify and hence rectify this issue is to boot your PC to Safe Mode. Doing so will disable all the third-party apps and give you the stock environment with just the system apps. If you are able to install the app in this mode, then the culprit is indeed a third-party app or software. Therefore, you should consider uninstalling it right away. Here’s how:
- Bring up the Run dialog box via Windows+R shortcut keys.
- Then type in the below command and hit Enter to open the System Configuration menu
msconfig
- Now go to its Boot tab and checkmark Safe Mode under Boot Options.
- Finally, click OK followed by Restart in the confirmation dialog box.
- Your PC will now boot to Windows Recovery Environment.
- Go to Troubleshoot > Advanced options > Startup Settings > Click Restart > Press 4 to boot to Safe Mode.
- Check if it fixes the Installer Stopped Prematurely Error on your Windows PC. If it does, then one of the third-party apps is indeed the culprit.
- So boot your PC to the normal mode and then uninstall the recently installed apps after which you started facing this issue.
FIX 5: Perform a Clean Boot
A third-party service could also create a few blockages in the OS’s network-related features. Therefore, you should consider disabling all the non-Microsoft-related services and then test out the results. Here’s how it could be done-
- Head over to the Start Menu, search System Configuration, and open it.
- Then go to the Services tab, checkmark Hide All Microsoft Services, and click on the Disable All button.
- Then go to the Startup tab and click on Open Task Manager.
- Now select a process from the list and click Disable. Do so for all the running services.
- Once done, restart your PC and then check if it fixes the Installer Stopped Prematurely Error on your Windows 11 PC.
FIX 6: Delete Temp & Prefetch folder
If a lot of temporary data gets accumulated over the due course of time, then not only would it slow down the system, but could also cause a conflict or two with the normal functioning of apps and services. Therefore, you should consider deleting these temporary data, using the instructions listed below.
- Bring up Run via Windows+R and type in the following command
temp
- Now select all the folders inside this temp folder via Ctrl+A and hit Delete.
- Again, bring up Run, and this time type in the below command
prefetch
- Similarly, select all the folders inside this temp folder via Ctrl+A and hit Delete.
- Check if it fixes the Installer Stopped Prematurely Error on your Windows PC.
FIX 7: Re-Register VBScript.dll
If the Dynamic Link Library file related to VBScript is not functioning properly, then also it could result in the error that we are currently dealing with. Therefore, it is advised to re-register this DLL file and then check if it spells out success or not.
- Launch Powershell as an administrator and execute the below commands
msiexec /unreg msiexec /regserver regsvr32 vbscript.dll
- Once all the three commands have been executed, restart your PC.
- Now check if it fixes the Installer Stopped Prematurely Error in Windows.
FIX 8: Use SFC and DISM Commands
System File Checker and Deployment Image Servicing and Management are two command-line utility tools that scan for corrupt Windows files and then replace them with their working counterpart. The major difference between the two is whereas the SFC replaces the corrupt files with the working ones from the cached directory on your PC, DISM does so by downloading the working files from the online Microsoft servers. And as of now, we would be making use of both these tools to fix the underlying mouse issue. Follow along.
- To begin with, launch CMD as an administrator from the Start Menu.
- Then execute the below command to open the SFC Tool:
sfc /scannow
- Once the SFC Scanning is complete, it’s time to use the DISM Tool. So copy-paste the below command:
DISM /Online /Cleanup-Image /RestoreHealth
- Now restart your PC and check if it fixes the Installer Stopped Prematurely Error in Windows.
FIX 9: Using Registry Tweak
In some instances, the (B54F3741-5B07-11cf-A4B0-00AA004A55E8) registry key gets duplicated and its second instance then creates quite a few issues with the system and apps. Therefore, you should assign a slightly different name to this second file and then tes out the results
- Open Registry Editor from the Start menu and go to the below location
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\
- Now select (B54F3741-5B07-11cf-A4B0-00AA004A55E8) , right-click on it and select Rename.
- Give it a slightly different name and hit OK o save it.
- check if it fixes the Installer Stopped Prematurely Error in Windows.
FIX 10: Create a new Local Admin Account
If none of the aforementioned methods managed to work out in your favor, then your last course of action should be to temporarily create a new Local Admin Account and then install the app using that account. Once done, you may then delete this account. Here’s how all of this could be carried out.
- Bring up the Settings menu via Windows+I shortcut keys.
- Then go to Accounts > Family and Other Users and click on Add Account.
- After that, click on I don’t have this person’s sign-in information.
- Next up, click on Add a user without a Microsoft account.
- Now give it a name, leave the password blank, and hit Next.
- Then click on Change Account Type.
- Select Administrator from the list.
- Now log out of your current account and log in to this new admin account. Then try installing the app, you would no longer get any error messages.
- Once done, log back into your old account. Then go to Settings > Accounts > Family and Other Users and hit Remove next to your new account.
That’s it. These were the various methods to fix the Installer Stopped Prematurely Error on your Windows PC. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.
