In this guide, we will show you the steps to install the Nusantara ROM based on the latest Android 13 onto your Poco F4. There are a plethora of custom ROMs available for the latest Poco device. All these ROMs are AOSP based and offer near about the same set of functionalities and UI/UX aspects. So the noise was doing the rounds that have we reached the point of ultimate saturation? Well, this is where Nusantara makes its entry to quash such rumors.
Granted it is another one of those AOSP ROMs, but this is where the similarity ends. It beholds some of the most intriguing features and customization options that you might not find anywhere else. On top of that, it has managed to provide a smooth usage experience, thereby maintaining a perfect equilibrium between the features and the overall device stability. So on that note, let’s make you aware of the steps to install the Nusantara Android 13 ROM onto your Poco F4.
Table of Contents
How to Install Nusantara ROM Android 13 on Poco F4 [Video]
The below process will wipe off all the data from your device. So take a complete device backup beforehand/ Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
STEP 1: Install Android SDK
First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide to install EvolutionX on Poco F4.
STEP 2: Enable USB Debugging and OEM Unlocking
Next up, you will also have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode. On the other hand, OEM Unlocking is required to carry out the bootloader unlocking.
So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.
STEP 3: Unlock Bootloader on Poco F4
Next up, you will also have to unlock the device’s bootloader. Do keep in mind that doing so will wipe off all the data from your device and could nullify its warranty as well. So if that’s all well and good, then please refer to our detailed guide on How to Unlock Bootloader on any Xiaomi Device.
STEP 4: Download Nusantara ROM for Poco F4
- You may now grab hold of the Nusantara for your device from the below link.
Nusantara ROM Poco F4: DOWNLOAD LINK
- Now rename the ROM file to rom.zip and transfer it to the platform-tools folder on your PC.
STEP 5: Install TWRP Recovery on Poco F4
You will now have to install a custom recovery onto your Poco F4 so as to flash Nusantara. For that, you could refer to our guide on How to Install TWRP Recovery on Poco F4 [Video].
STEP 6: Boot to TWRP Recovery
- Now connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Type in the following command in the CMD window to boot your device to TWRP Recovery
adb reboot recovery
STEP 7: Install Nusantara ROM on Poco F4
- From TWRP, go to Wipe and select Format Data. Then type YES in the space provided and hit the checkmark.
- Now transfer the ROM ZIP file to your device via TWRP Recovery itself.
- Then go to Install, select the ROM ZIP file, and perform a right swipe to flash it.
- Once done, go to Reboot and select System. Your device will now boot to the newly installed OS.
That’s it. These were the steps to install Nusantara ROM on your Poco F4. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.
