How to Root Realme 2 Pro without TWRP Recovery

Sadique Hassan•Updated Sep 21, 2020

In this tutorial, we will show you how to root the Realme 2 Pro device. To begin with, we will be extracting the OZIP firmware. Then we will use the stock boot.img file from that extracted OZIP firmware. After this, we will patch the stock boot.img file using the Magisk Manager app. Finally, this patched boot image will be flashed on to your Realme 2 Pro device using the Fastboot Commands.

The device has a 6.3-inch screen and 1080 x 2340 pixel resolution with a 19.5:9 aspect ratio. The device was launched two years back with Android 8.1 (Oreo) out of the box. It has since been updated to Realme UI 1.0, based on Android 10. Under the hood, you get an octa-core Qualcomm SDM660 Snapdragon 660 chipset. For the gamers, there is Adreno 512 GPU. Furthermore, the devices come in three different variants: 64GB 4GB RAM, 64GB 6GB RAM, and 128GB 8GB RAM.

The dual rear camera with 16+2MP could record videos at 4K@30fps. The single 1080p@30fps selfie camera is capable of 1080p@30fps video recording. It has also managed to retain a 3.5mm headphone jack, which wouldn’t be of any surprise because devices in this range usually have one. With a rear-mounted fingerprint, there is a 3500mAh battery that supports 10W charging. All in all, it is a pretty decent offering from Realme in the budget domain.

But this is the starting. You could get much more out f your device once you have unlocked the bootloader. After this, you could flash a custom ROM, a custom recovery like TWRP, and tons of other Mods and Frameworks. But what the users might be most interested in is the ability to gain administrative rights in the form of rooting. This will in turn give you the option to gain access to the system partition. And our focus will be on just that. So without further ado, here are the required instructions to root the Realme 2 Pro. Follow along.

Table of Contents

Rooting Realme Devices: What’s the Major Hurdle?

There exist two different methods to root any Android device. The first one simply involves flashing the Magisk Installer ZIP via TWRP. However, not every device has a working custom recovery like TWRP. In that case, the second alternative stands rooting the device without TWRP, using Magisk. All that is needed is a stock boot.img file for your firmware which could then be patched via Magisk and flashed via Fastboot commands.

However, with Realme, things begin to get a little bit difficult in this. The thing is all the Realme stock firmware comes in OZIP extension. Hence you cannot extract the firmware contents ‘the normal way’. You will have to make use of Python and a Decrypt tool to extract this firmware and get the boot image file. Trust us all these sounds difficult only on paper but in practice, it is way too much easier to execute. And in this guide, we will be making use of just that.

On that note, here are the complete instructions to root the Realme 2 Pro device via Magisk without TWRP Recovery. here is the blueprint of this guide- we will first use Python and Decrypt tool to convert OZIP stock firmware to the ZIP package. Then we will extract that ZIP package via WinZIP or WinRAR. After this, the extracted stock boot.img file will be patched via Magisk. Finally, the magisk patched image fill be flashed via Fastboot on your Realme device. Follow ahead for the complete instructions.

How to Root Realme 2 Pro

To begin with, there are a few requirements that your device needs to qualify. Make sure to go through them before you proceed with the rooting steps. Droidwin or any of its members won’t be held responsible if anything happens to your device. Proceed ahead at your own risk.

Prerequisites

Download and install the Android SDK Platform Tools on your PC. This will give us the necessary ADB and fastboot binaries.
Next up, enable USB Debugging on your Realme device. It will help your PC in recognizing your device in ADB mode. We would be needing to access ADB mode to reboot your device to Fastboot Mode. To enable Debugging, head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging.
USB Debugging on Android
Finally, download and install the Magisk Manager APK file onto your Realme device.

You may now proceed with the steps to root Realme 2 Pro via Magisk, without TWRP Recovery. Follow along.

STEP 1: Unlock Bootloader

To begin with, you will have to unlock the device’s bootloader. If you haven’t done so, refer to our detailed guide on How to Unlock Bootloader on Realme 2 Pro. For that, we would be making use of the Realme 2 Pro In-Depth Test Tool APK and one ADB and one Fastboot command. All the instructions are given in the linked guide. Do keep in mind that this process will wipe off all the data from your device and might also make the warranty null and void. Proceed ahead with caution.

STEP 2: Convert Realme 2 Pro Firmware from OZIP to ZIP

You now have to covert the Convert Realme 2 Pro Firmware from OZIP to ZIP. We need to do this because then only we could extract the boot image file from ZIP. Extracting an OZIP file is just not possible using WinZIP or WinRAR. For that, a specific set of tools and instructions are needed. So head over to our comprehensive tutorial on How to Extract OZIP Realme Stock ROM (Firmware).

STEP 3: Extract Stock Boot Image File

Once you have converted your device’s stock firmware from OZIP to ZIP, make use of the WinZIP or WinRAR tool to extract the stock boot.img file. No need to extract all the contents of stock firmware. Just the boot.img file will do. Once you have extracted the file, move to your device’s Internal Storage.

STEP 4: Patch Stock Boot Image via Magisk

STEP 4 & STEP 5 outlines the steps to patch stock boot.img file via Magisk and then flash it via Fastboot Commands. For detailed instructions on this topic, refer to our guide on how to Patch Stock Boot Image via Magisk and Flash it using Fastboot.

Launch Magisk Manager APK on your device.
Tap on Install next to the Magisk status (which would show Magisk is not Installed).
Now install Magisk popup will appear, tap on Install.
Under the Select method dialog box, tap on Select and Patch a file.
Navigate to the stock boot.img file that you have transferred to your device in the earlier section and select it.
Magisk will then patch this file and the entire process shall only take a few seconds.
Once that is done, head over to Internal Storage > Downloads folder and you will find the magisk_patched.img file there.

STEP 5: Flash Magisk Patched Boot Image onto Realme 2 Pro

Transfer the magisk_patched.img file from your device to the folder where Android SDK Platform Tools are installed. This should be the platform-tools folder on your PC.
Now connect your device to PC via USB cable. Make sure USB debugging is enabled.
Head over to that platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Execute the following command in the CMD window to boot your Realme device to fastboot mode:
```
adb reboot bootloader
```
Finally, make use of the below command to flash the Magisk patched boot image file:
```
fastboot flash boot magisk_patched.img
```
Once the flashing is done, you may reboot your device. For that either use the hardware key or the below command:
```
fastboot reboot
```

With this, we conclude the guide on how to root the Realme 2 Pro device via Magisk, without making use of the TWRP Recovery. If you any doubts, do let us know in the comments section below. Furthermore, now that Android 11 is live in its stable build, here are some Android 11 guides that deserve your attention as well.

Tags: