Home > Unlock Bootloader

How to Unlock Bootloader on Nubia Red Magic 8 Pro

In this guide, we will show you the steps to unlock the bootloader on your Nubia Red Magic 8 Pro. The Red series from Nubia is among the most underrated players in the flagship category, mainly due to its regional restrictions. But owing to the powerful spec sheet that it beholds and its intriguing in-house OS, users from across the globe have been exporting this device in large numbers.

If we shift our attention towards custom development, then although it isn’t the most active player in this domain, still there are a plethora of mods that you could welcome abode onto your device. But before you could carry out any of these tweaks, you’ll have to checkmark an important prerequisite off the list- the bootloader on your Nubia Red Magic 8 Pro needs to be unlocked. And in this guide, we will show you how to do just that. Follow along.

Benefits and Risks of Bootloader Unlocking

Unlock Bootloader on Nubia Red Magic 8 Pro

Unlocking the bootloader is the gateway to extract maximum benefits of Android’s open-source ecosystem. For example, you will be able to install a custom ROM or flash a custom recovery like TWRP. Likewise, you will also be able to get access to the system partition as well as administrative privileges by rooting your device via Magisk.

This will then allow you to flash Magisk ModulesXposed FrameworkSubstratum ThemesViper4Android among others. Likewise, you will also be able to flash OxygenOS on top of ColorOS. However, carrying out these tweaks brings in a few uninvited risks as well. To begin with, it will wipe off all the data and could nullify the device’s warranty as well.

Along the same lines, it will degrade the Widevine L1 certification to L3, thereby preventing you from streaming content in HD [FIXED]. The SafetyNet will be triggered as well [FIXED], thereby preventing you from using banking apps [FIXED]. So if that’s well and good then let’s get started with the steps to unlock the bootloader on Nubia Red Magic 8 Pro

How to Unlock Bootloader on Nubia Red Magic 8 Pro

The process will wipe off all the data from your device. So please take a complete device backup beforehand. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

STEP 1: Install Android SDK

install adb platform tools windows

First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform tools folder, which will be used throughout this guide.

STEP 2: Enable USB Debugging and OEM Unlocking

Next up, you will have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode. On the other hand, OEM Unlocking is required to carry out the bootloader unlocking process. So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.

STEP 3: Boot Nubia Red Magic 8 Pro to Fastboot Mode

  1. Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
  2. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
  3. Type in the following command in the CMD window to boot your device to Fastboot Mode
    adb reboot bootloader

    Unlock Bootloader on Nubia Red Magic 8 Pro

  4. Now type in the below command to verify the Fastboot Connection
    fastboot devices

    Unlock Bootloader on Nubia Red Magic 8 Pro

  5. If you don’t get a serial ID, then you’ll have to install the Fastboot Drivers on your PC.

STEP 4: Install Fastboot Drivers

Next up, you will have to install the Fastboot Drivers so that your PC is able to identify the connected device in Fastboot Mode. So please check out our guide on How to Install Fastboot Drivers in Windows 11.

Unlock Bootloader on Nubia Red Magic 8 Pro

STEP 5: Unlock the Bootloader on Nubia Red Magic 8 Pro

  1. Type in the below command in the CMD window that is opened inside the platform-tools
    fastboot flashing unlock

    unlock bootloader oneplus 11r

  2. At this point in time, you will get a confirmation message on your device. Use the Volume keys to select the Unlock the Bootloader option and hit the Power key to confirm it.
    Unlock Bootloader on Nubia Red Magic 8 Pro
  3. The device will undergo a reset and then the bootloader will be unlocked. Do keep in mind that the first boot might take up to a minute, this is completely normal.
  4. Furthermore, you will have to log in to Google ID and set up your device from scratch, since a wipe has taken place. That’s it.

These were the steps to unlock the bootloader on the Nubia Red Magic 8 Pro. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.


Share:
  • serkan sadioğulları

    My red magic 8s pro device, I am typing the commands you wrote, the commands are not working, the software is up to date “FAILED (remote: unknown command)
    finished. I get the “total time: -0.000s” warning and it doesn’t work.