In this guide, we will show you the steps to install the Xiaomi EU ROM on Mi 10/10T/Pro/Ultra/Lite devices. When it comes to custom development, the tweaks that you could perform onto your devices stand endless. From gaining access to the system partition by rooting your device via Magisk to installing a custom recovery like TWRP, there’s a lot to try out.
Along the same lines, there exists a truckload of custom ROMs that you could flash on your Mi 10 series devices. However, many users are contained with the offering from the Xiaomi EU Community. Being close to the stock MIUI experience, but without having unnecessary customizations and bloatwares features, it has quickly become the go-to choice for tech enthusiasts.
Moreover, they are lite weight and hence gain an upper hand in the performance domain. This ultimately leads to faster performance and hence the conservation of your battery life. Combining all these benefits, and there’s no second-guessing why it is preferred by many users. So in this guide, we will show you the steps to install the Xiaomi EU ROM on Mi 10/10T/Pro/Ultra/Lite devices.
Table of Contents
How to Install Xiaomi EU ROM on Mi 10/10T/Pro/Ultra/Lite
The below instructions are listed under separate sections for ease of understanding. Make sure to follow in the exact same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
STEP 1: Install Android SDK
First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide to flash the Xiaomi EU ROM onto Mi 10/10T/Pro/Ultra/Lite.
STEP 2: Enable USB Debugging and OEM Unlocking
Next up, you will also have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode. On the other hand, OEM Unlocking is required to carry out the bootloader unlocking process.
So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.
STEP 3: Unlock Bootloader on Mi 10/10T/Pro/Ultra/Lite
Since this is an unofficial ROM (a custom ROM to be precise), you will need to unlock the device’s bootloader. However, doing so will wipe off all the data and could nullify the device’s warranty as well. So if that’s all well and good, then please refer to our guide on How to Unlock the Bootloader on any Xiaomi Device. Once that is done, you may move over to the next step to install the Xiaomi EU ROM onto the Mi 10/10T/Pro/Ultra/Lite devices.
STEP 4: Download Xiaomi.EU ROM for Mi 10/10T/Pro/Ultra/Lite
Next up, grab hold of the Xiaomi EU ROM for your device from the below links (stable builds are the recommended ones). I have uploaded the latest ones at the time of writing. Likewise, I have also attached the direct link to check for the latest builds.
- xiaomi.eu_multi_MI10Ultra_V12.5.6.0.RJJCNXM_v12-11.zip
- xiaomi.eu_multi_MI10Pro_V12.5.8.0.RJACNXM_v12-11.zip
- xiaomi.eu_multi_HMK30SUltra_MI10T_V12.5.5.0.RJDCNXM_v12-11.zip
- xiaomi.eu_multi_MI10_V12.5.8.0.RJBCNXM_v12-11.zip
- xiaomi.eu_multi_MI10LITE5G_V12.5.2.0.RJIMIXM_v12-11.zip
- Check for Latest Builds
STEP 5: Install TWRP Recovery on Mi 10/10T/Pro/Ultra/Lite
You will need to have the TWRP Recovery installed in order to flash the Xiaomi EU ROM. We have prepared two separate guides for the same, refer to the one corresponding to your device.
Once your device is booted to TWRP, it might be in the Chinese language. If that is the case, then you could refer to our guide on How to Change Language in TWRP Recovery.
STEP 6: Perform a Factory Reset via TWRP
- This process will wipe off all the data from your device, so take a backup beforehand.
- Then go to the Wipe section of TWRP and tap on Format Data.
- Finally, type in Yes in the space provided and hit Enter.
STEP 7: Transfer ROM ZIP File to Device via TWRP
Once the format is complete, transfer the Xiaomi EU ROM to your device. This could be done via Mount, ADB Sideload, or USB OTG. You may also refer to our guide below guides for this purpose:
- [3 METHODS] How To Transfer or Install Files via TWRP Recovery
- How to Use ADB Sideload in Android [Stock and TWRP Recovery]
- How to Use USB OTG or Pen Drive to Flash File via TWRP Recovery
STEP 8: Install Xiaomi EU ROM on Mi 10/10T/Pro/Ultra/Lite via TWRP
- Go to the Install section of TWRP, navigate to the ROM ZIP file, and select it.
- Then perform a right swipe to flash it. The flashing might take around 5-10 minutes.
- Once done, you may then reboot the device to the OS via Reboot > System.
That’s it. These were the steps to install the Xiaomi EU ROM on Mi 10/10T/Pro/Ultra/Lite. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.
