In this guide, we will show you the steps to install Viper4Android on your Pixel 6/7/Pro device running Android 13. The ratio of users who root their devices has considerably decreased over the past couple of years, mainly due to the fact that the OEM themselves manages to checkmark “most” of the prerequisites that were earlier only possible via a root module. With just one exception- an audio mod.
It’s not an exaggeration when we state that for many users, having an audio mod is the sole reason why they step into custom development. But since the Android ecosystem is filled with a plethora of audio mods, which one should you opt for? Well, it goes without saying that Viper4Android is the best in this domain, without an iota of a doubt.
But up until this point, it was quite a challenging task in porting it for 64-bit and making it compatible with the thirteenth iteration of the OS. Not anymore! Thanks to some impressive work done by the developers, you could now install the Viper4Android on your Pixel 6/7/Pro device running Android 13. So without further ado, let’s check out how this could be carried out.
Table of Contents
How to Install Viper4Android on Pixel 6/7/Pro running Android 13
Before you start off with the below steps. make sure that your device is rooted. If that is not the case, then do refer to our guide on Root Pixel 6/Pro via Magisk patched boot OR Root Pixel 7/Pro Magisk patched init_boot. Once done, you may then start off with the installation.
Important Notes
- As of now, this mod is currently in the early testing stage so you might come across a few bugs and issues.
- In this regard, you could keep a track of its current status, bugs, and releases directly from its GitHub page.
- Once you have installed both the module and APK, play any music first and only then launch the app [for now].
Installation Steps
- First off, download the Viper4Android RE module ZIP and APK files from GitHub and transfer them to your device.
- Now launch Magisk, go to the Modules section, tap on Install from Storage and select the Viper4Android RE module.
- It will now be flashed. Once done, go back and install the Viper4Android app via its APK. Once done, restart your device.
- Now launch Viper4Android and enable the toggle next to the Master Limiter.
- Then tap on the Settings icon at the top right and enable Legacy Mode.
- Once done, open any music player and play a song of your choice [compulsory step].
- Then come back to Viper4Android and hit the Driver tab, you should now see the drivers are installed!
That’s it. These were the steps to install Viper4Android on your Pixel 6/7/Pro device running Android 13. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.