In this guide, we will show you the steps to fix the Poco M3 DeadBoot issue. As of now, the popular Chinese OEM is concurrently running three different series. While the Redmi devices have always been the crowd favorite and Mi the underrated winners, it is the one from Poco that seems to have managed a carve out a niche segment for itself. The reason for the same is hardly a secret either. When you are getting a truckload of features without burning a hole in your pockets, there’s not much left to ask. However, it does go through its fair share of issues as well.
Recently, quite a few users installed the official OTA update on their Poco M3 but right in the middle the device just turned off and refused to respond. This is perhaps the most concerning issue that one could face, more so because you didn’t carry any unofficial modification but was simply installing the official update rolled out by Xiaomi. Fortunately, there do tend to exists a couple of workarounds that have been known to fix this issue. And in this guide, we will make you aware of just that. So without further ado, let’s get started with the steps to fix the Poco M3 DeadBoot issue.
Table of Contents
How to Fix Poco M3 DeadBoot Issue [Device Not Turning On]
We have shared two different methods through which you could rectify the aforementioned issue. You may try out the one that you find more comfortable to deal with. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
Fix 1: Take the Fastboot Approach
Many users were able to rectify this issue after booting their device to Fastboot Mode and from there, booting it back to the OS. Here’s how you could try it out:
- To begin with, power off your device.
- Then press and hold the Power and Volume Down keys for about 5-7 seconds.
- Your device will boot to the Fastboot Mode.
- Now again press and hold the Power and Volume Down for a few seconds
- Your device will exit the Fastboot Mode and boot to the system.
That’s it. This was the first method to fix the Poco M3 DeadBoot issue. Let’s now make you aware of the other two.
Fix 2: Perform a Force Reboot
One of the concerned users contacted the Poco support team and their representative shared this method with them. What you need to do is press and hold the Power key for a considerable time period, around 15-17 seconds. This will force-reboot the device and shall then fix the Poco M3 DeadBoot issue as well.
Fix 3: Drain the Battery
The third and final fix requires you to completely drain your battery. For that, just leave your device aside until the battery level goes down to 0% and it turns off. When that happens, plug your device into the charger. As soon as the device starts charging, it shall boot to the OS and the issue stands rectified.
So with this, we round off the guide on how you could fix the Poco M3 DeadBoot issue. We have shared three different methods for the same. Do let us know in the comments section which one spelled out success for you.
