In this comprehensive guide, we will show you the steps to check the battery charging information on your OnePlus device using a dialer code. Likewise, we will also list out the various charging terminologies used by the OEM and the Power, Current, and Voltage they consume. So without any further ado, let’s get started.
How to Check Battery Charging Information on OnePlus
- Bring up the dialer and type in the below code:
*#899#
- Then go to Manual Test -> Device Debugging.
- Now go to Charge test and you’ll see the following options:
Generic Charger Vooc Charger Super Vooc QC Charger
- If you are sure which charger you are currently using, then you can directly go to that section and get hold of all the required information.
- On the other hand, if you are not sure about the charger type, then go to each section, the unsupported ones will show as Please switch a charger whereas the correct one will display the Pass message.
- Talking about the details, here is all the information that you can get with regard to your battery:
Capacity Battery Voltage Charging Status Charger Voltage Charger Type Battery Current Fast Charger Battery Type
- As you can see from the above screenshot, I’m using a Super Vooc Charger with a 10V charger voltage.
- Moreover, from my investigation, I found out that the following information regarding the charging technology and its associated voltage and current [and hence the Power value, remember P=V*I, where V is voltage and I is current in Ampere]
Warp Charge - 5V 6A = 30W SuperVOOC - 10V 5A = 50W
So that’s all from this guide regarding the steps to check the battery charging information on your OnePlus device using a dialer code. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution as soon as possible.
