Home > OnePlus

Boot OnePlus 9/Pro/9R/9RT to EDL Mode [5 Methods]

In this guide, we will show you various methods to boot your OnePlus 9/Pro/9R/9RT to EDL Mode. While the OEM is currently on a downward trajectory, all thanks to its questionable decision-making of incorporating elements of ColorOS into OxygenOS. And no matter how much it denies it, but the latest OnePlus OS skin looks closer to Oppo’s skin than its own. The only saving grace in all of this is the fact that their ninth iteration is still quite active in custom development.

Be it for gaining administrative access by rooting your device via Magisk, or flashing ROMs and recoveries, or welcoming a plethora of most onto your device, there’s a lot to try out. However, this is just one side of the coin. While these tweaks give you plenty of goodies, but there’s always an associated risk of the device ending up in a bootloop or bricked state. If it is in a boot loop, then you could easily lash the firmware via Fastboot and rectify it.

However, the real challenge comes when the device ends up hard bricked. Fortunately, that’s not the case with the OnePlus ninth series. Since they come with an underlying Qualcomm chipset, you could access its Emergency Download Mode and then flash the OFP firmware via MSM Download Tool to bring your device back to life. So without further ado, let’s check out the five different methods to boot your OnePlus 9/Pro/9R/9RT to EDL Mode.

How to Boot Bricked OnePlus 9/Pro/9R/9RT to EDL Mode

Boot oneplus 9 pro to edl mode

Before you proceed with the instructions, make sure to checkmark all the prerequisites that we have listed below. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

Prerequisites

  • First and foremost, install the Qualcomm USB Driver on your PC. This is needed so that your PC could recognize the connected OnePlus 9/Pro/9R/9RT in EDL Mode.Boot oneplus 9 pro to edl mode
  • Your device also needs to be powered off before starting with the process. In most cases, a bricked OnePlus device is already in that state. However, if you are unable to turn it off due to the device being stuck in Qualcomm CrashDump Mode, then press and hold the Volume Up and Power button together for around 10 seconds. This will exit the CrashDump Mode and your device will be powered off.Boot oneplus 9 pro to edl mode
  • Next up, it is recommended to use the official USB cable that came with your device. Likewise, it is also advised that you use the USB 2.0 port on your PC [and not the USB 3.0 port].
  • Finally, once you have successfully booted your device to EDL Mode using the below-given instructions, you should then check out the guide to flash the OFP firmware via MSM Download Tool to unbrick your OnePlus 9/Pro/9R/9RT.Boot oneplus 9 pro to edl mode

First Method to Boot OnePlus 9/Pro/9R/9RT to EDL Mode

  1. To begin with, power off the device.
  2. Then press the Volume Up and Down keys together and your device shall boot to EDL Mode.
  3. Keeping both the volume keys pressed, connect the device to the PC via a USB cable.
  4. Then release the Volume Keys and hit the Start Button on the MSM Tool.

Second Method to Boot OnePlus 9/Pro/9R/9RT to EDL Mode

  1. Launch MSM and click Start [you will get the “waiting for device” message]
  2. Turn off your device and connect one end of the USB cable to your PC.
  3. Then connect the other end to your device.
  4. Now press the Volume Up, Volume Down, and Power keys together for a few seconds.
  5. The MSM tool will recognize your device and it will start the flashing process.

Third Method to Boot OnePlus 9/Pro/9R/9RT to EDL Mode

  1. Power off your device.
  2. Then press and hold the Volume Up key for 5 seconds.
  3. Now connect your device to the PC via a USB cable.
  4. Release the Volume Keys and hit the Start Button on the MSM Tool.

How to Boot Non-Bricked OnePlus 9/Pro/9R/9RT to EDL mode

Not just for unbricking your device, but you could also use the MSM Download Tool when your OnePlus is in a perfectly working condition. It comes in handy in situations when you are looking to change the region or downgrade your device to an earlier OS version. So if you are looking to carry out any of these tweaks, then here’s how you could boot your OnePlus 9/Pro/9R/9RT to EDL Mode.

Boot OnePlus 9/Pro/9R/9RT to EDL Mode via ADB Command

  1. Download and extract Android SDK Platform Tools on your PC.Boot oneplus 9 pro to edl mode
  2. Then enable USB Debugging on your device and connect it to your PC via a USB cable.
  3. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter.command-prompt-inside-adb
  4. This will launch the Command Prompt. Execute the below command to boot your OnePlus 9/Pro/9R/9RT to EDL Mode:
    adb reboot edl

    Boot oneplus 9 pro to edl mode

Boot OnePlus 9/Pro/9R/9RT to EDL Mode via TWRP

This method requires you to have a working TWRP Recovery installed beforehand. If you have already checkmarked this prerequisite, then refer to the below steps to boot your OnePlus 9/Pro/9R/9RT to EDL Mode.

  1. Download and extract Android SDK Platform Tools on your PC.Boot oneplus 9 pro to edl mode
  2. Then enable USB Debugging on your device and connect it to your PC via a USB cable.Boot oneplus 9 pro to edl mode
  3. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter.command-prompt-inside-adb
  4. This will launch the Command Prompt. Execute the below command to boot your device to TWRP Recovery:
    adb reboot recovery
  5. Once booted to TWRP, go to Reboot and select EDL.Boot oneplus 9 pro to edl mode
  6. That’s it. Your device will now boot to EDL mode.

How to Check if OnePlus 9/Pro/9R/9RT is Booted to EDL Mode

As soon as your device is booted to EDL mode, the MSM tool would automatically identify it. However, rather than being dependent on a third-party tool, let’s take the official route, as explained below.

  1. Right-click on the Start Menu and select Device Manager. Then expand the Ports section.
  2. If your device is listed as Qualcomm-HS-USB-QDLoader-9008, then it has been successfully booted to EDL.Boot oneplus 9 pro to edl mode
  3. On the other hand, if it shows QHUSB_BULK, then the EDL connection hasn’t been successfully established.
  4. In that case, refer to the steps mentioned in the prerequisites section and retry the tweaks that we have mentioned.

With this, we round off the guide on how you could boot your bricked/non-bricked OnePlus 9/Pro/9R/9RT to EDL Mode. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.


Share:
  • Hey,

    Good to see such detailed instruction about the lot.

    But I can’t seem to get the MSM for the 9rt as its not in the list. All these need authorisation.

    How do you unbrick it? (soft/boot loop)